Skip to content

Brands we repair

Miele washing machine repairs

A Miele is built for a long working life, so a fault deserves a proper diagnosis. Our Miele washing machine repairs cover front loaders and washer-dryers at your home in Gauteng: the technician explains what has failed and what the repair involves, and quotes before any work starts.

  • Quote before any work starts
  • R300 call-out, only if you decline the quote
  • 6-month warranty on parts and labour
On this page
  1. Built for a long life
  2. When your Miele needs a technician
  3. Miele faults we repair
  4. Fault messages on Miele displays
  5. Before you book a Miele repair
  6. Parts for Miele machines
  7. Miele washer-dryers
  8. Looking after a Miele
  9. Areas and booking

Built for a long life

Miele is a German company, founded in 1899 by Carl Miele and Reinhard Zinkann near Gütersloh and still owned by the two founding families. It made its first washing machine in the early 1900s, and today its machines are known for durability: Miele says it tests its washing machines to the equivalent of 20 years of use, around 10,000 hours of running. In Gauteng homes you'll find several generations side by side, from older Novotronic and Softtronic machines to the current W1 range.

A few Miele features you may come across. The patented honeycomb drum, introduced in 2001, has a honeycomb pattern that lets the laundry glide on a thin film of water. TwinDos models dose liquid detergent automatically from two containers behind a flap at the bottom of the machine. Models with the Miele Waterproof System (WPS) have a double-walled inlet hose with safety valves at the tap end, which shut off the water if a leak is detected. Because a Miele is designed to last, a repair is usually worth considering before replacement, and we repair Miele machines as part of our washing machine repairs service.

When your Miele needs a technician

Book a technician if your Miele:

  • won't spin, or the laundry comes out dripping;
  • won't drain;
  • won't open its door after the programme;
  • won't take in water;
  • leaves detergent in the drawer, or TwinDos stops dosing;
  • makes loud or unusual noises;
  • vibrates heavily or moves during the spin;
  • stops in the middle of a programme;
  • trips the circuit breaker or earth leakage; or
  • leaks.

Miele faults we repair

Draining

Water left in the drum usually comes from a blocked drain filter, a kinked drain hose or a worn drain pump. Your manual shows where the drain filter is on your model and how to clean it. See what to do when the water won't drain.

Water intake

If the machine won't take in water, check the tap first. Otherwise the cause is usually a blocked filter in the inlet hose connection, the inlet valve, or the hose itself. See a machine that won't take in water.

Detergent not taken in

Detergent left in the drawer usually means low water pressure or a drawer that needs cleaning, especially if you use fabric softener. Rinse the drawer, including the siphon in the softener compartment, and check that the tap is fully open. If it keeps happening with good pressure, the inlet valve may be restricting the flow.

Leaks

Water at the front usually comes from the door seal or the detergent drawer, while water underneath or at the back points to a hose, the drain pump, or a drain filter that wasn't screwed fully home after cleaning. On WPS models, a leak can also set off the water protection, which stops the programme and shuts off the water. See finding where a leak starts.

Door won't open

Like most front loaders, a Miele keeps its door locked while there's water in the drum or the temperature inside is high, so wait for the programme to finish and the machine to cool. If the door still won't release, or there's water left inside, the drain or the door lock needs a technician. Don't force the door: see washing machine door won't open.

Noise, vibration and spinning

Loud noises and heavy vibration on spin can be an unbalanced load, an unlevel machine, worn shock absorbers or springs, or worn bearings. A machine that won't spin may be protecting itself from an unbalanced load or from water that hasn't drained, or may have a motor or sensor fault. See noise and vibration on the spin and a machine that won't spin.

Heating

Laundry that comes out cold at the end of a hot programme points to the heating element or its temperature sensor. Scale and detergent residue on the element shorten its life, which is one more reason to run a hot wash now and then.

Electronics

A Miele's control electronics run the whole programme, so a fault there can look like almost anything: a dead display, buttons that don't respond or a programme that stops at random. The technician rules out the power supply, the door lock and the wiring before quoting for an electronic part.

Stopping and tripping

A Miele that stops mid-programme is usually reporting a fault on its display. A machine that trips the circuit breaker or earth leakage may have a fault in the heating element or wiring, or water reaching an electrical part. Leave it off at the wall and have it tested; don't keep resetting the breaker.

Fault messages on Miele displays

Miele machines report problems on the display, as a short message or a fault number depending on the model, and older machines without a text display flash their indicator lights instead. A message about the water inlet or the drain often points to something you can check yourself, like the tap or the drain filter, while a fault number that comes back after those checks needs a technician. Note the message or count the flashes, then send it to us with the model and serial number from the data plate, and see our guide to a washing machine showing an error code for the safe first steps.

Before you book a Miele repair

Switch the machine off at the wall, then check these simple things first:

  • The plug point is working (unplug the machine and try a lamp in the socket).
  • The tap is fully open and the inlet hose isn't kinked or crushed.
  • The drain hose runs freely to the drain, and the drain filter is clean (unplug the machine first, and have towels and a container ready for water that may still be hot).
  • The door is firmly closed, with no laundry trapped in the seal.

If a fault message comes back after these checks, write it down or photograph it, and leave the rest to the technician.

Parts for Miele machines

Many Miele parts are specific to Miele, and some are made only for particular models, so the technician identifies the exact model and serial number before quoting. The data plate also carries a material number, which tells versions of the same model apart. See washing machine parts replacement.

Miele washer-dryers

A Miele washer-dryer combines a front loader with a drying system, so it can develop the faults of either. When it washes well but no longer dries, the drying side needs testing. See what goes wrong on the drying side.

Looking after a Miele

Regular care keeps a Miele running efficiently and safely, and helps it reach the long life it was built for:

  • Clean the drain filter as the manual describes, with the machine switched off at the wall and unplugged, and towels and a container ready for the water.
  • Rinse the detergent drawer now and then, especially the softener compartment.
  • Run a hot wash regularly, particularly if you mostly wash at low temperatures, to keep the drum and hoses fresh.
  • Leave the door slightly open after washing so the seal can dry, unless a small child or pet could climb inside.
  • Check the inlet hose for bulges or cracks now and then, and keep it free of kinks.
  • Don't overload the drum, and wash a single heavy item, such as a bath mat, with a few towels so the load can balance.

Areas and booking

We repair Miele washing machines across Johannesburg, Pretoria, Centurion, Sandton, Midrand and the East Rand, and everything is done at your home.

Call 079 895 0496, or send a WhatsApp to the same number, to book; you can also use our contact page. A photo of the data plate, and of any message on the display, helps the technician prepare.

ProServ is an independent repairer. We are not affiliated with, authorised or endorsed by Miele. Miele is a trademark of its owner and is used here only to describe the machines we repair. If your machine is still under the manufacturer's warranty, contact Miele first, because outside repairs may affect that warranty.

Four simple steps

How it works

  1. Contact us

    Call or WhatsApp with your machine brand and what it is doing. A photo of the error code helps.

  2. A technician comes out

    We book a time that suits you, and on urgent call-outs we aim to arrive within 1 hour, depending on where the technician is working.

  3. Diagnose and quote

    We find the fault and give you a clear price before any work. The R300 call-out fee is only payable if you decide not to go ahead with the quote.

  4. Repair

    Most repairs are done on the spot when the part is available, and every repair carries our 6-month warranty.

Questions and answers

Miele washing machine repair questions

Is an older Miele worth repairing?
Often, yes. A Miele with a sound drum, tub and cabinet is usually worth a repair such as a pump, valve or door lock, even after many years of use. If several major parts have failed at once, the technician will compare the cost with replacing it.
Where is the model and serial number on my Miele?
On many models the data plate is above the porthole glass, visible when you open the door. It shows the model, the material number and the serial number. If it isn't there, the manual shows where to find it on your model.
Can I fit an ordinary inlet hose to my Miele?
Not if it has the Waterproof System. On a WPS model the inlet hose is part of the leak protection, with a safety valve at the tap end, so it has to be replaced with the right WPS hose for your model. If the hose is damaged, close the tap and book a technician to fit the new one.
My Miele TwinDos has stopped dosing. What should I check?
Check that both containers are pushed fully into place and have detergent in them, and that TwinDos is switched on for the programme you chose. If a container is seated and full but nothing is dosed, the dosing system needs a technician.
Is it safe to keep using my Miele if it leaks?
No. Switch off before you touch a wet floor: at the wall if the plug and socket are dry, or at the DB board if they're wet. Then close the tap and put towels down. Even a small leak can reach electrical parts or damage the floor and cabinets around the machine, so book a technician to find where the water is coming from.
Why does my Miele spin so gently on some programmes?
Delicate programmes, such as woollens and silks, spin gently on purpose to protect the fabric, and many programmes let you choose the spin speed. If laundry comes out wet on a cottons programme too, check that the load isn't bunched to one side, and clean the drain filter with the machine unplugged and towels and a tray ready. If it still happens, book a technician.

Book a technician

Miele washing machine playing up?

Call or WhatsApp now and we'll book a technician to come to you. You'll get a quote before any work starts.

info@proservwashingmachinerepairs.co.za