Skip to content

Common washing machine problems

Washing machine noisy when spinning or shaking

Is your washing machine noisy when spinning? The kind of noise usually tells you what's wrong. A rumble or roar that rises with speed points to worn bearings, banging or shaking to an unbalanced load or worn suspension, and rattling or scraping to something caught between the drum and tub.

  • Quote before any work starts
  • R300 call-out, only if you decline the quote
  • 6-month warranty on parts and labour
On this page
  1. Which noises are normal?
  2. Match the noise to the cause
  3. Worn bearings: the rumble that grows
  4. Banging, shaking and walking
  5. Rattles, scrapes and trapped objects
  6. Safe checks before you call
  7. When to stop using it
  8. What the technician checks and fixes
  9. How long noise repairs take
  10. Keeping it quiet
  11. Book a technician to listen

Which noises are normal?

A washing machine is never silent. Water rushing in, the pump humming as it drains, the click of the door lock and a rising whine as the drum speeds up are all normal. So is a soft thud or two as the machine redistributes the load before a spin. Inverter and direct drive machines tend to be quieter than older belt-driven ones.

What isn't normal is a noise that's new, gets louder week by week, or comes with the machine moving. A rumble, bang, grind, squeal or scrape is worth investigating early, because the parts that make those noises tend to damage other parts the longer they run.

Match the noise to the cause

The noiseWhen you hear itLikely cause
Rumbling or roaring, like a jet engineGetting louder as the spin speeds upWorn drum bearings
Banging, thumping, rocking or walkingAt the start of the spin, or all the way throughUnbalanced load, machine not level, worn suspension, transit bolts left in
Rattling or clinkingDuring the wash and the spinA coin, button or underwire between the drum and the tub
Scraping or grating on every turnEven at slow speedSomething caught between the drum and the tub, or a drum that has dropped and is rubbing
Grinding or buzzingWhile the water drainsAn object in the drain pump, or a worn pump
SquealingAs the drum speeds upA worn or slipping drive belt, or failing bearings
A heavy knock once per turnDuring the spinA loose counterweight or pulley, or a cracked drum support

Worn bearings: the rumble that grows

The drum turns on a pair of bearings at the back of the tub, protected by a rubber seal. When that seal lets water through, the bearings rust and wear, and the first sign is a low rumble on the spin that grows louder over weeks or months. Left alone, the drum develops play, the rumble turns into a roar, and the damage can spread to the shaft, the bearing housing and the tub.

Bearings are a bigger repair because the machine has to be stripped down to the tub, and on machines with a sealed tub the whole tub assembly is replaced. Our article on the signs of worn washing machine bearings explains how to tell, and our guide to repair costs explains why the price varies.

Banging, shaking and walking

An unbalanced load

A single heavy item, such as a bath mat, a duvet or a pair of jeans in a small load, throws the drum off centre so it bangs against the cabinet. The machine usually tries to correct it, but not always in time. If it can't even the load out, many machines slow the spin or skip it, as our guide to a machine that won't spin explains.

A machine that isn't level

All four feet need to stand firmly on the floor with their lock nuts tightened. Uneven tiles, a sloping laundry floor or a suspended wooden floor upstairs can turn normal vibration into shaking you can feel across the room.

Worn suspension

Front loaders hang the tub on springs and steady it with shock absorbers, while many top loaders hang theirs from suspension rods. As these wear, the tub swings further than it should and knocks the cabinet on every spin.

Transit bolts left in

New front loaders are delivered with bolts through the back that lock the tub for transport. If they aren't removed, the machine shakes violently and can quickly damage itself. The same goes after a move if the bolts were refitted for the journey and never taken out again. Our washing machine installation service takes care of this.

Loose counterweights

Heavy weights bolted to the tub keep it steady. If their bolts work loose, you'll hear a heavy knock as the drum turns.

Rattles, scrapes and trapped objects

Coins, hair clips, buttons and bra underwires slip through the holes in the drum or past the door seal, and end up between the drum and the outer tub. There they rattle on every turn, scratch the drum and, in the worst cases, puncture the tub or jam the pump.

A scraping sound on every revolution needs attention before it does that kind of damage. If you can see something poking through a drum hole, don't run the machine again until it has been taken out.

Safe checks before you call

Safety first: switch off at the wall and unplug before you check the drum, the seal or the filter. Don't tilt the machine or lie it down, don't take panels off, and don't run it again if you hear grinding or scraping.

  1. Note when the noise happens. Filling, washing, draining or spinning? A short video with sound, sent on WhatsApp, helps the technician a lot.
  2. Rebalance the load. Spread the washing out, take out any single heavy item and run a spin-only programme to see whether the noise has gone.
  3. Check that it's level. Press down on opposite corners. If it rocks, adjust the feet as your manual describes and tighten the lock nuts.
  4. If it's new or recently moved, look at the back for transit bolts. If they're still in, don't use the machine until they've been taken out.
  5. Check the seal and the filter. Clean out the folds of the door seal, and clean the pump filter as your manual describes, with towels and a tray ready for the water.
  6. Give it space. Make sure the machine isn't touching a wall, a cupboard or another appliance, and that the hoses aren't knocking against anything.

When to stop using it

Switch off at the wall and book a technician if the rumble is getting louder, if you hear grinding or scraping, if the machine keeps banging with a well-balanced load, or if it walks far enough to stretch its hoses. Water under the machine, a burning smell or rust-coloured water as well as the noise are also reasons to stop. They suggest a seal, bearing or motor problem that will only get worse. If water is collecting under the machine, our guide to a leaking washing machine helps you work out where it is coming from.

What the technician checks and fixes

The technician listens to the machine through a cycle, then checks the drum by hand for play and roughness. With the panels off they inspect the bearings and seal, the shock absorbers and springs or suspension rods, the counterweight bolts, the drum support, the belt and pulley, and the pump.

  • Trapped objects: removed, often through the opening for the heating element, without stripping the machine.
  • Shock absorbers or suspension rods: replaced, usually as a pair or a full set so the tub hangs evenly.
  • Loose counterweights or pulley: refitted and tightened.
  • Bearings and seal: replaced together on a tub that can be split. On a sealed tub, you get a quote for the tub assembly so you can decide.
  • Noisy pump: cleared or replaced.

Our front loader repairs and top loader repairs pages explain the bearing and suspension work in more depth, and the LG, Defy and Speed Queen pages cover those makes.

How long noise repairs take

Removing an object, tightening a counterweight or replacing shock absorbers is usually done in one visit when the parts are available. Bearings take several hours, and if the bearings or the tub for your model have to be ordered, that's explained with the quote, before you agree to the repair. On an older machine with worn bearings, our repair or replace guide helps you weigh up the cost.

Keeping it quiet

  • Mix large and small items in every load, and don't overload the drum.
  • Empty pockets, and wash underwired bras in a laundry bag.
  • Check the levelling whenever the machine has been moved.
  • Have a new rumble looked at early, before it damages the tub.
  • Keep the transit bolts if you're likely to move house, and have them refitted before the machine goes on the back of a bakkie.

Book a technician to listen

Not sure what you're hearing? Send us a short video of the noise on WhatsApp, or book a technician to come and listen. You'll get a quote before any work starts, and the repair carries our 6-month warranty on parts and labour.

Questions and answers

Frequently asked questions

Can I keep using a noisy washing machine?
It depends on the noise. A machine that bangs because of one heavy item is fine once you rebalance the load, but a rumble from worn bearings or a scraping object gets worse with every wash and can make the repair more expensive. If you're not sure, stop and get it checked.
Why does my machine shake more with small loads?
A small load has fewer items to spread around the drum, so one heavy piece throws it off balance easily. Adding a few towels to even it out usually helps. If it shakes badly with every load size, the suspension needs checking.
Are worn bearings worth replacing?
On many machines, yes, especially newer or better-quality ones where the tub can be split. On machines with a sealed tub the whole tub assembly is needed, which costs more and can tip the balance towards a new machine. The technician gives you the figures so you can decide.
Why does my new washing machine shake so violently?
The transit bolts that lock the tub for delivery are probably still in, or the machine isn't level. Running it with the bolts in can damage the suspension and bearings quickly, so stop using it until they're out and the feet are adjusted.
What is the rattling sound during the wash?
Usually a coin, button, hair clip or underwire that has worked its way between the drum and the outer tub. It may come and go as the object moves around. A technician can usually remove it without a major strip-down.
Is it normal for my washing machine to move during the spin?
A little vibration is normal, but the machine shouldn't walk across the floor. If it moves, check the load, the levelling feet and the lock nuts. If it still moves with a balanced load on a level floor, the shock absorbers or springs are likely worn.
Why does my machine squeal when the spin starts?
On belt-driven machines, a worn or loose belt can squeal as it slips on the pulley. A failing bearing can also squeal before it starts to rumble. Either way, have it checked before the belt breaks or the bearing wears further.
My machine is upstairs and the whole floor shakes. What can help?
Start with the basics: a balanced load, a level machine with its lock nuts tight, and space all round it. Suspended floors move more than concrete slabs, so a slightly lower spin speed can help too. If it's worse than it used to be, the suspension may be worn.

Book a technician

Still not working? We'll come to you.

Call or WhatsApp now and we'll book a technician to come to you. You'll get a quote before any work starts.

info@proservwashingmachinerepairs.co.za