Skip to content

Brands we repair

Speed Queen washing machine repairs

Speed Queen machines are built for heavy use, at home or in a small business, and we repair them on site across Gauteng. Our Speed Queen washing machine repairs cover heavy-duty top loaders and front loaders: the technician finds the fault and quotes before any work starts.

  • Quote before any work starts
  • R300 call-out, only if you decline the quote
  • 6-month warranty on parts and labour
On this page
  1. Why Speed Queen machines are different
  2. How a Speed Queen top loader runs a wash
  3. Speed Queen faults we repair
  4. Electronic models and fault codes
  5. Speed Queen front loaders
  6. Safe checks before calling
  7. Homes and small businesses
  8. Quote, call-out fee and warranty
  9. Moving and installing a heavy machine
  10. Looking after a heavy-duty washer
  11. Areas and booking

Why Speed Queen machines are different

Speed Queen is an American brand with roots in 1908, when two hardware store owners in Ripon, Wisconsin, went into the washing machine business. The machines took the Speed Queen name in 1928, and the brand now belongs to Alliance Laundry Systems, which also builds machines for laundromats. That commercial background shapes the home machines: the company has used stainless steel wash tubs since 1939, and it describes its top loaders as commercial-grade machines built to last.

The Speed Queen top loaders sold in South Africa have a central agitator and a steel drum, and they're used both in homes and by small businesses that wash a lot, such as guest houses. They're heavy, simple to use and, with the right parts, very repairable. We repair them, and Speed Queen front loaders, as part of our washing machine repairs service.

How a Speed Queen top loader runs a wash

Knowing the order of a cycle helps you tell us where yours stopped. A Speed Queen top loader takes in hot and cold water through its inlet valves, then the central agitator moves the load through the water. After draining, the inner tub spins fast, and the water flung out through its holes collects in the outer tub and is pumped away.

Inside, a motor drives the agitator and the tub through a belt and transmission, and a pump empties the tub after the wash and during the spin. Simpler models run each stage from a timer dial and newer ones from an electronic touchpad, so tell us which yours has and the last stage it finished. Our page on repairing a top loader explains how the technician tracks down the part that has failed.

Speed Queen faults we repair

Shaking and walking

A heavy top loader that thumps and moves on spin is usually out of level or out of balance. Check that all four feet are firmly on a flat, solid floor and that the load is spread evenly around the agitator. If it still shakes, the suspension that steadies the tub may be worn and need replacing. See shaking and banging on the spin.

Not filling, or filling slowly

Low water pressure, a partly closed tap, kinked hoses or blocked screens where the hoses connect to the machine slow the fill. A failed inlet valve stops it completely, or lets water in when it shouldn't. See slow or no fill.

Not draining

A kinked or blocked drain hose, a blocked household drain or a worn pump leaves water in the tub. Small items, such as socks, can also find their way into the pump. See why water stays in the tub.

Agitator or spin not working

If the machine fills but the agitator doesn't move, or it drains but won't spin, look at the lid first: the machine won't spin unless the lid switch or lid lock confirms the lid is closed. After that, the belt, the transmission and the motor are the usual suspects, and the technician tests them in turn. See a top loader that won't spin.

Leaks

Leaks usually come from a loose or cracked hose, the pump, or a seal where the drive meets the tub. A drip at the back points to the hose connections, while water under the machine during the drain or spin points to the pump or its hoses. See tracking down a leak.

Wrong water temperature

On a Speed Queen connected to both a hot and a cold tap, a cold wash on a warm setting usually means the hot water isn't reaching it. Check that both taps are open and that the geyser is switched on and hasn't tripped. If the supply is fine, the hot inlet valve may have failed.

Noise

Grinding or squealing points to a worn belt, bearings or transmission, while knocking can be the suspension or something trapped between the tubs. Coins and buttons are the usual culprits.

Controls and timers

On dial-controlled models, a worn timer can stop the machine moving from one stage to the next. On electronic models, the control board runs the cycle and reports faults on the display.

Electronic models and fault codes

A Speed Queen with a timer dial and no display usually can't show a code, so tell us where the dial was pointing when it stopped. Models with an electronic touchpad can show a fault code instead. Check what it means in your owner's manual, then send us a photo of the display with the model and serial number. Our guide to a washing machine showing an error code covers the safe first steps.

Speed Queen front loaders

Speed Queen also makes front loaders, and we repair them too. Their faults follow the usual front loader pattern: a door lock that won't engage or release, a blocked drain pump, a leaking door seal, worn bearings that rumble on spin, or a fault in the electronic controls. See how front loaders are repaired, and if you're choosing between the two types, our guide to front loaders vs top loaders.

Safe checks before calling

Before you check anything, switch the machine off at the wall and unplug it. Then:

  • Make sure the house has power and the plug point works (try a lamp in it).
  • Open both taps fully and look for kinks in the fill hoses.
  • Check the drain hose isn't kinked or pushed too far into the standpipe.
  • Spread the load evenly around the agitator, and take some out if the tub is packed.
  • Check that the machine stands level and doesn't rock.
  • Close the lid firmly before you try again.

If the machine has stopped with water in the tub, don't tip it to empty it. Leave it switched off, and the technician will drain it before starting work.

Safety first: never lift the top, remove the control panel or open the cabinet to look inside. Speed Queen machines are heavy and run on mains power, and the drive and motor are no place for hands. If the earth leakage or circuit breaker trips when the machine runs, leave it off and call a technician.

Homes and small businesses

We repair Speed Queen washers wherever they work, in a family home or at a small business such as a guest house, where the machine may run several loads a day. Repairs are done on site, so the machine doesn't have to be moved. Because the machines are heavy, make sure the technician can get to the machine and that there's a little space around it to work.

On a machine that runs several loads a day, small signs matter more: a fill that's getting slower, a new noise on spin or water left in the tub at the end of a cycle. Booking at that stage usually means a simpler repair and less time without the machine.

A machine that works this hard benefits from a regular check-up. A washing machine servicing visit looks over the parts that wear, such as the hoses, filters and suspension, before a small problem becomes a breakdown.

Quote, call-out fee and warranty

After the diagnosis you get a clear quote, and no work starts until you've agreed to it. The call-out fee is R300, only payable if you decide not to go ahead with the quote. Your repair is then covered by our 6-month warranty on parts and labour.

Moving and installing a heavy machine

Speed Queen machines are heavier than most household washers, so don't drag one across a tiled floor, tip it on its side or try to lift it on your own to move it. If yours is going into a new home or a new spot, our washing machine installation service connects and levels it properly, which matters on a machine this heavy, because one that isn't level will thump and walk on spin.

Looking after a heavy-duty washer

  • Don't overload, even with a big tub: the clothes need room to move around the agitator.
  • Spread heavy items, such as towels and jeans, evenly around the agitator.
  • Use the amount of detergent the manual suggests; extra detergent leaves residue rather than cleaner clothes.
  • If the fill gets slow, clean the screens in the hose connections as the manual describes: close both taps, switch off at the wall and unplug first, and keep a towel ready for the water left in the hoses.
  • Prop the lid open after washing so the tubs can dry out.
  • If you mostly wash in cold water, run an empty hot wash now and then to clear detergent residue from the tubs.
  • Keep the machine on a solid, level floor, which matters even more for a heavy machine on spin.

Areas and booking

We repair Speed Queen washing machines across Johannesburg, Pretoria, Centurion, Sandton, Midrand and the East Rand, and the technician comes to you.

To book a technician, call or WhatsApp 079 895 0496, or send a booking request. Send the model and serial number from the label on the machine and a photo of any code, and tell us whether the machine is at a home or a business. For a business machine, say roughly how many loads it runs a day, because that helps the technician know which wear parts to check.

ProServ is an independent repairer. We are not affiliated with, authorised or endorsed by Speed Queen. Speed Queen is a trademark of its owner and is used here only to describe the machines we repair. If your machine is still under the manufacturer's warranty, contact Speed Queen first, because outside repairs may affect that warranty.

Four simple steps

How it works

  1. Contact us

    Call or WhatsApp with your machine brand and what it is doing. A photo of the error code helps.

  2. A technician comes out

    We book a time that suits you, and on urgent call-outs we aim to arrive within 1 hour, depending on where the technician is working.

  3. Diagnose and quote

    We find the fault and give you a clear price before any work. The R300 call-out fee is only payable if you decide not to go ahead with the quote.

  4. Repair

    Most repairs are done on the spot when the part is available, and every repair carries our 6-month warranty.

More brands

Other brands we repair

Questions and answers

Speed Queen washing machine repair questions

Are Speed Queen washing machines worth repairing?
Usually, yes. They are heavily built, with a steel wash tub, and most faults involve one part such as a lid switch, inlet valve, pump, belt or suspension component.
Does a Speed Queen top loader use a lot of water?
An agitator top loader fills the tub to wash, so it uses more water than a front loader of a similar size. That's normal. If it overfills, keeps filling or takes far longer than usual to fill, the inlet valve or the water supply needs checking.
Are Speed Queen parts available in South Africa?
Many common parts are, but as an imported brand some have to be ordered. The technician checks before quoting, and tells you if a part has to be ordered before you agree to the repair.
Why do sheets tangle in my Speed Queen?
An agitator moves the load around a central post, so long items such as sheets and duvet covers can wrap around it. Load them loosely and evenly around the agitator, and don't pack the tub. Tangling on its own isn't a fault.
Is my Speed Queen meant to be louder than a front loader?
An agitator top loader with a mechanical drive usually makes more noise than a modern front loader, especially as the agitator changes direction. What isn't normal is a new grinding, squealing or banging sound, which is worth booking a technician for before it gets worse.
Is it worth replacing the transmission on a Speed Queen?
Often, yes, because the rest of the machine, including the steel tub, usually has plenty of life left. The transmission is one of the bigger repairs on a top loader, so the technician rules out the belt, the motor and the lid switch first, then quotes before you decide.
My Speed Queen agitator moves, but the clothes don't turn over. Why?
Usually the tub is packed too tightly, or the load size setting is too low for the amount of laundry, so the clothes can't roll down through the water. Take some items out, or choose a larger load size. If the agitator moves weakly even with a sensible load, the drive or belt needs a technician.

Book a technician

Speed Queen washing machine playing up?

Call or WhatsApp now and we'll book a technician to come to you. You'll get a quote before any work starts.

info@proservwashingmachinerepairs.co.za