Skip to content

Brands we repair

Siemens washing machine repairs

From drain and leak faults to door locks, bearings and electronics, our Siemens washing machine repairs cover iQ front loaders, built-in machines and washer-dryers. The technician diagnoses the machine where it stands, in your home in Gauteng, and quotes before any work starts.

  • Quote before any work starts
  • R300 call-out, only if you decline the quote
  • 6-month warranty on parts and labour
On this page
  1. Who makes Siemens washing machines
  2. Symptoms worth a call
  3. Siemens faults we repair
  4. Siemens and Bosch error codes
  5. What you can check yourself
  6. Built-in Siemens machines
  7. Siemens care tips
  8. Is a Siemens worth repairing?
  9. Areas and booking

Who makes Siemens washing machines

Siemens-branded washing machines are made by BSH Hausgeräte, the home appliance company owned by the Bosch group, which uses the Siemens name under licence. Siemens AG sold its share of BSH at the start of 2015, and the Siemens and Bosch ranges are built on related platforms. That's why many Siemens faults and parts look familiar to anyone who knows Bosch machines (see Bosch washing machine repairs), although the models are not identical.

Siemens sells its machines in iQ ranges, such as iQ300, iQ500 and iQ700, as freestanding front loaders, built-in machines and washer-dryers. Features you may see on yours include:

  • iQdrive: a brushless motor, so there are no carbon brushes to wear out.
  • aquaStop: leak protection that shuts off the water supply if a leak is detected.
  • varioSpeed: an option that shortens programme times when you're in a hurry.
  • i-Dos: automatic dosing of liquid detergent and softener from built-in tanks, on some models.

We repair Siemens machines as part of our washing machine repairs service, at your home.

Symptoms worth a call

  • Water left in the drum at the end of a programme.
  • No water coming in, or a water supply code on the display.
  • A leak warning, or water under the machine.
  • A drum that won't turn, turns slowly or won't spin up.
  • A door that won't lock or won't release.
  • A rumble, roar or knock on spin.
  • Cold washes on a hot programme.
  • A blank or frozen display.

Siemens faults we repair

Drain and fill faults

Drain faults are usually the pump filter behind the flap at the bottom front, a kinked or blocked drain hose or a worn pump. Fill faults are usually the tap, low pressure, a blocked filter in the hose connection, the aquaStop valve or the inlet valve. Our guides to drainage faults and a slow or failed fill cover the checks in more detail.

Leak protection

When water collects in the base, the leak protection stops the programme and cuts the supply, and clearing the warning doesn't fix the leak. A leak that never reaches the base, such as a drip at the tap connection behind a built-in machine, shows up outside it instead, as described under hidden leaks below. Our page on a washing machine leaking helps trace the source.

Motor and drum

Newer iQdrive machines don't have carbon brushes, so a drum that won't turn points to the motor, its control electronics, the door lock or something jamming the drum. Older Siemens machines with brushed motors can simply need new brushes, which is one of the more straightforward repairs. Our guide to a drum that won't spin covers the simpler causes to rule out first.

Door lock faults

If the door lock can't confirm it has locked, the programme won't start, and if it can't release, the door stays shut after the wash. A sock caught in the seal or a worn catch on the door is worth ruling out before the lock itself is replaced. For what is safe to try first, see our guide to a door that won't open or lock.

Bearings

Worn bearings rumble on spin and get louder as the speed rises. Catching them early matters, because a bearing that is left to fail can damage the drum shaft and the tub, which turns a bearing job into a much bigger one. See noise on the spin.

Heating

A failed element or temperature sensor leaves washes cold. You may notice it first as whites that come out greyer than usual, or stains that a hot programme used to shift.

Siemens and Bosch error codes

Because the platforms are related, many Siemens machines show codes in a similar style to Bosch machines, but not every code means the same thing on every model. Our Bosch washing machine error codes guide is a useful starting point; always confirm against the manual for your model. Our guide to a washing machine showing an error code covers the safe first steps.

What you can check yourself

With the machine switched off at the wall, a few quick checks can save you a call-out:

  • Test the plug point with a lamp, and make sure the power is back and stable after load shedding.
  • Turn the tap fully open, and look for kinks in the aquaStop hose behind or beside the machine.
  • Make sure the drain hose isn't flattened and the household drain isn't blocked.
  • Unplug the machine, then clean the pump filter behind the flap at the bottom front as your manual describes, with towels and a tray ready for the water and any hot water left to cool.
  • Check that the child lock isn't on and that the door closes with a firm click.

If a leak warning or a code comes back after these checks, leave the machine off and book a technician rather than restarting it again and again.

Built-in Siemens machines

With a built-in Siemens, most of the extra work is getting to the machine. It sits behind a cabinet door with the hoses and plug out of reach, so the technician slides it out of its space, carries out the repair and refits it, realigning the cabinet door afterwards. The repair itself is the same as on a freestanding machine. Mention when you book that yours is built in, and clear the area in front of the cabinet. See how we repair front loaders and washer-dryers.

Hidden leaks

Cabinetry hides the floor around a built-in machine, so a small leak can go unnoticed for a long time. Swollen cupboard edges, a musty smell from the kitchen units or damp skirting near the machine are all signs to close the tap and book a technician, even if the machine still seems to work.

Siemens care tips

  • Clean the pump filter every few months, with the machine unplugged and towels and a tray ready.
  • On i-Dos models, let the machine dose the liquid detergent from its tank; on others, measure the dose to the load, because foam that overflows into the base trips the leak protection just as a leak would.
  • Run an empty hot wash now and then to clear residue, and leave the door ajar afterwards if children and pets can't get to the machine.
  • Leave the detergent drawer slightly open between washes so it can dry, and rinse it out now and then.
  • Keep the inlet hose free of kinks behind the machine, especially after it has been pushed back into place.

Is a Siemens worth repairing?

Usually, yes. The numbers change when an older machine needs bearings in a sealed tub, or a control module and another major part at the same time.

With a built-in machine, the cost of fitting a new one into the same space belongs in the sum too. The technician will compare the cost with a new machine and say so plainly. See our guide to repairing or replacing an older machine, and our page on washing machine parts replacement.

Areas and booking

We repair Siemens washing machines across Johannesburg, Pretoria, Centurion, Sandton, Midrand and the East Rand.

Ring or WhatsApp 079 895 0496 to book, or leave your details on our contact page. A photo of the rating plate around the door opening, plus any code on the display, helps the technician arrive knowing what to look for, because the E-Nr and FD number on the plate show which parts your machine takes. If the plate is hard to read, the model number is also in the manual and often on the original invoice.

ProServ is an independent repairer. We are not affiliated with, authorised or endorsed by Siemens. Siemens is a trademark of its owner and is used here only to describe the machines we repair. If your machine is still under the manufacturer's warranty, contact Siemens first, because outside repairs may affect that warranty.

Four simple steps

How it works

  1. Contact us

    Call or WhatsApp with your machine brand and what it is doing. A photo of the error code helps.

  2. A technician comes out

    We book a time that suits you, and on urgent call-outs we aim to arrive within 1 hour, depending on where the technician is working.

  3. Diagnose and quote

    We find the fault and give you a clear price before any work. The R300 call-out fee is only payable if you decide not to go ahead with the quote.

  4. Repair

    Most repairs are done on the spot when the part is available, and every repair carries our 6-month warranty.

Questions and answers

Siemens washing machine repair questions

Can I put washing powder in the i-Dos tank?
No. The i-Dos tanks are made for liquid detergent and liquid softener. If you prefer powder, use the normal detergent drawer and dose it by hand.
My Siemens finishes the wash but the clothes are still very wet. Why?
The machine may have skipped or cut short the final spin because the load was unbalanced or the water didn't drain fully. Switch off at the wall and unplug, clean the pump filter as your manual describes with towels and a tray ready, then spread the load more evenly. If it keeps happening, the drain pump, the motor or a sensor may need a technician.
Does using varioSpeed harm my Siemens?
No. varioSpeed simply shortens the programme so the wash finishes sooner. If programmes suddenly take far longer than usual without it, mention that when you book, because a heating or drain fault can stretch a cycle.
Do you repair Siemens washer-dryers?
Yes. We repair both halves of a Siemens washer-dryer, from drain and door faults on the washing side to the drying heater, fan, condenser and sensors on the drying side.
Will my Siemens need a new control module after load shedding?
Not necessarily. A surge can damage the module's power supply, but a dead display can also come from the plug point, the door lock or the wiring. The technician tests those first, and if the module has failed, quotes for one that matches your E-Nr and FD number.
Why does my Siemens smell of drains?
A drain smell often comes from the house drain rather than the machine: if the standpipe or trap that the machine empties into is blocked or dry, sewer smells can travel back up the hose. Switch the machine off at the wall and unplug it, then clean the pump filter over towels and a tray and run an empty hot wash. If it still smells, the technician can check the drain hose, its connection and the household drain.

Book a technician

Siemens washing machine playing up?

Call or WhatsApp now and we'll book a technician to come to you. You'll get a quote before any work starts.

info@proservwashingmachinerepairs.co.za