Brands we repair
Bosch washing machine repairs
If your Bosch won't fill or drain, leaks, or roars on the spin, the technician finds the cause at your home. Our Bosch washing machine repairs cover freestanding and integrated front loaders and washer-dryers across Gauteng, from drain, fill and leak faults to bearings and boards, with a quote before any work starts.
- Quote before any work starts
- R300 call-out, only if you decline the quote
- 6-month warranty on parts and labour
On this page
Bosch machines and their technology
Bosch's washing machines come from BSH Hausgeräte, the Bosch group's home appliance company, which also builds Siemens-branded machines on related platforms. That's why the two brands have so much in common (see Siemens washing machine repairs). Bosch sells its machines in ranges such as Series 4, Series 6 and Series 8, mostly as front loaders, either freestanding or built in behind a kitchen cabinet door, along with washer-dryers.
A few Bosch features matter when something goes wrong:
- EcoSilence Drive: a brushless motor, used on many newer models and designed to run quietly and efficiently.
- AquaStop: leak protection built into the inlet hose and the base of the machine. When it detects a leak, it stops the water supply and the machine shows a fault. The safety valve sits in the housing at the tap end of the hose, so a damaged AquaStop hose is replaced as a complete unit rather than cut or patched.
- ActiveWater: load sensing that adjusts the water to the size of the load, so a small load uses noticeably less water than a full one.
- i-DOS: automatic dosing from built-in tanks on some models, designed for liquid detergent and fabric conditioner.
Bosch machines are well made, but they share the wear parts every front loader has. The sections below explain what usually lies behind the problems you're most likely to notice.
Common Bosch faults and causes
Not filling with water
The tap may be partly closed, the water pressure low, or the inlet hose kinked or its filter blocked. If the AquaStop valve or the inlet valve has failed, no water gets in at all. Many models show a water supply code, such as E17, which shows as F17 on some models. See water supply faults.
Not draining
Fluff, coins and hair clips collect in the pump filter behind the service flap at the bottom front, and that filter is the first thing to check when water stays in the drum. A kinked drain hose, a blocked household drain or a worn pump are the other usual causes. Many models show E18 for a drain fault, and Bosch says F18 and d02 are the same fault; machines that use longer codes show E:30-80 or a code starting E:36 instead. See what to check when a machine won't drain.
Stopping mid-cycle
A Bosch that stops part-way through has usually detected something it doesn't like: water that won't drain, a door that won't stay locked, a load it can't balance, a heater that isn't warming the water, or a motor that isn't turning as it should. The display, and the point in the cycle where it stops, help the technician narrow it down.
Tripping the electricity
If the earth leakage trips when the machine runs, often as it starts to heat, the heating element, the wiring or water reaching an electrical part may be to blame. Leave it switched off at the wall and don't keep resetting the trip switch: this one is for a technician.
Leak protection warning and leaks
A leak protection warning means water has collected in the base of the machine. Resetting may clear the display, but the water came from somewhere: a hose, the pump, the door seal, the detergent drawer or a seal inside the tub. Too much foam can also overflow into the base. The leak has to be found and fixed. See where washing machine leaks come from.
Loud on spin, or walking across the floor
A rumble or roar that rises with the spin speed usually means worn drum bearings. Banging or walking can be worn shock absorbers, an unlevel machine, an unbalanced load or, on a newly installed machine, transit bolts that were never removed. See what spin noises mean.
Door locked, or won't lock
A Bosch keeps its door locked while there's water in the drum or the wash is still hot, so a short wait after the programme ends is normal. If it stays locked long after that, the water may not have drained, or the door lock may have failed. A lock that won't engage stops the machine starting at all. See washing machine door won't open.
Water not heating
Cold washes on a hot programme mean the heating element or its temperature sensor has probably failed. Scale building up on the element over the years shortens its life.
Won't start
Check the simple things first: power at the wall, a delayed start setting and the child lock. If the machine still won't start, the door lock, the power supply on the control module or a stored fault may be the reason. See washing machine won't turn on.
Bosch error codes in brief
Bosch machines with a display show a fault as a code, usually an E followed by two digits (written E:18 on some models), and, depending on the model, the same fault can show with an F, such as F18 for E18. Machines without a full display flash their lights instead. Our Bosch washing machine error codes guide explains the common codes and the safe checks for each. If a code returns after those checks, book a technician and send us the code with the E-Nr from the rating plate.
Safe checks for Bosch owners
- The power is on at the wall and the plug point works (test it with a lamp). During load shedding, wait until the power is back and stable.
- The child lock isn't on. Your manual shows which button or buttons to hold to switch it off.
- The tap is fully open, and the AquaStop hose isn't kinked or crushed behind the machine.
- The drain hose isn't kinked and runs to a clear drain.
- The pump filter is clean. It is behind the service flap at the bottom front, and many models have a small emergency drain hose next to it.
- The load is sensible and the machine stands level.
- If the machine was moved recently, the hoses weren't kinked or squashed when it was pushed back into place.
Safety first: switch off at the wall and unplug the machine before you open the service flap, and let the water cool if a hot wash was running. Put down towels and a shallow tray, and expect more water than you'd think. Never open the cabinet.
Integrated Bosch machines
A built-in Bosch sits behind a kitchen cabinet door, with the hoses and plug hidden behind it. To work on it, the technician removes the plinth (the kick board under the cabinets) and slides the machine out carefully, then disconnects the hoses. Once the repair is done, the machine goes back in, the cabinet door is checked for alignment and the hoses are checked for leaks before the plinth goes back on. That takes longer than a freestanding machine, so the extra time is included in the quote. Before the visit, clear the cupboards and floor in front of the machine, and check whether the tap and plug are in the next cupboard, so the technician can reach them.
Bosch washer-dryers
A Bosch washer-dryer is a front loader with a drying system added: a heater and a fan blow warm air through the tumbling laundry, and a condenser takes the moisture out of that air. If it washes well but the laundry comes out damp, first check that you're drying no more than the drying capacity in the manual, which is smaller than the washing capacity. If smaller loads are still damp, the heater, the fan, a temperature sensor or lint in the drying path is the usual cause. See our page on a washer-dryer that won't dry.
Reading the rating plate
The rating plate on the inner rim of the door opening carries the E-Nr (the model number) and the FD number, which together identify the exact version of your machine. Bosch has made many generations of similar-looking machines with different parts, so these numbers are how the technician makes sure the right part is quoted. If the label isn't on the door rim, look behind the service flap or on the back of the machine.
Is a Bosch worth fixing?
In most cases, yes. It's a harder call when an older machine needs a control module and bearings at the same time, or when the bearings sit in a tub that has to be replaced as a whole. The technician will tell you honestly if the repair doesn't make sense, and our repair or replace advice helps with the decision. For more on what the work involves, see how we repair front loaders.
Looking after your Bosch
- Clean the pump filter every few months, with the machine unplugged, and more often if you wash pet bedding or work clothes.
- Use a measured dose of detergent made for automatic machines. Too much foam can overflow into the base and set off the leak protection.
- If your model has i-DOS, fill the tanks with liquid detergent and fabric conditioner only.
- Run an empty hot wash, or the drum clean programme if your model has one, every month or so.
- Leave the door ajar after washing, as long as no small child or pet can climb in, and wipe the folds of the door seal.
- Switch off at the wall during load shedding, and wait until the power is stable before starting a wash.
Areas and booking
We repair Bosch washing machines across Johannesburg, Pretoria, Centurion, Sandton, Midrand and the East Rand. All the work happens at your home, which matters with integrated machines that are fitted into the kitchen. Bosch is one of the brands covered by our washing machine repairs service, and you get a quote before any work starts.
To book, call or WhatsApp 079 895 0496 or use our online booking form. Send the E-Nr and FD numbers from the rating plate (or a photo of the plate), any code on the display and a few words on what the machine is doing.
ProServ is an independent repairer. We are not affiliated with, authorised or endorsed by Bosch. Bosch is a trademark of its owner and is used here only to describe the machines we repair. If your machine is still under the manufacturer's warranty, contact Bosch first, because outside repairs may affect that warranty.
Four simple steps
How it works
-
Contact us
Call or WhatsApp with your machine brand and what it is doing. A photo of the error code helps.
-
A technician comes out
We book a time that suits you, and on urgent call-outs we aim to arrive within 1 hour, depending on where the technician is working.
-
Diagnose and quote
We find the fault and give you a clear price before any work. The R300 call-out fee is only payable if you decide not to go ahead with the quote.
-
Repair
Most repairs are done on the spot when the part is available, and every repair carries our 6-month warranty.
Areas we cover
Bosch repairs across Gauteng
Questions and answers
Bosch washing machine repair questions
Does my Bosch have carbon brushes?
Why do some Bosch programmes take so long?
Can I add a forgotten item after my Bosch has started?
Do I still need to close the tap if my Bosch has AquaStop?
Can I tip my Bosch to clear the leak protection warning?
Does a Bosch washing machine need regular servicing?
Book a technician
Bosch washing machine playing up?
Call or WhatsApp now and we'll book a technician to come to you. You'll get a quote before any work starts.