Brands we repair
Smeg washing machine repairs
Whether your Smeg won't drain, won't spin or has stopped mid-cycle, a technician comes to you. Our Smeg washing machine repairs cover freestanding and integrated machines and washer-dryers in homes across Gauteng, with a quote before any work starts.
- Quote before any work starts
- R300 call-out, only if you decline the quote
- 6-month warranty on parts and labour
On this page
- About Smeg washing machines
- Why Smeg faults need testing
- Signs your Smeg needs attention
- Simple checks before you book
- Smeg faults we repair
- How the technician finds the fault
- Integrated Smeg washer-dryers
- Load shedding and your Smeg
- Parts for Smeg machines
- Repair or replace your Smeg?
- Care tips for Smeg owners
- Areas and booking
About Smeg washing machines
Smeg is an Italian company, founded in 1948 by Vittorio Bertazzoni in Guastalla, in the province of Reggio Emilia. The name is an acronym of the original enamelling and metalworking business, and the company introduced its first washing machine in the 1960s. Smeg is known for design-led appliances, and its laundry range in South Africa includes freestanding front loaders, fully integrated washer-dryers and tumble dryers, with features such as steam and automatic dosing on some models.
Smeg machines are part of our washing machine repairs service, alongside all the other major brands.
Why Smeg faults need testing
A modern Smeg relies on sensors reporting to an electronic control board, so when a part fails, the machine often just stops or refuses to spin, and the symptom alone rarely shows which part it was. A machine that won't spin could have a drain problem, a door lock fault, an unbalanced load or a motor fault, and only testing tells them apart.
So beyond the simple checks below, leave the testing to the technician. There's mains voltage inside the machine, and a part swapped on a guess may not be the one that failed.
Signs your Smeg needs attention
- It won't drain, or water stays in the drum.
- It won't fill, or the programme won't start.
- The spin is weak or missing, or the machine shakes hard.
- The door won't lock or won't open.
- It leaks, at the front or underneath.
- It stops mid-cycle or shows a fault on the display. See what a code on the display means.
- It no longer dries properly, if it's a washer-dryer.
Simple checks before you book
These checks are safe to do yourself, as long as you switch the machine off at the wall first:
- Check that the house has power, and test the plug point with a lamp.
- Open the tap fully, and make sure the inlet hose hasn't been kinked behind the machine or the cabinet.
- Make sure the drain hose isn't squashed and the household drain is clear.
- Close the door firmly, with no laundry trapped in the seal.
- Check that a delayed start or the child lock hasn't been set by accident.
Leave anything beyond that, including any fault that trips the electricity, to the technician.
Smeg faults we repair
Smeg front loaders share their main wear parts with other European front loaders:
- Drain pump and filter: blockages from coins, hair clips and lint, or a worn pump. See machines that won't drain.
- Water intake: a closed or partly closed tap, low pressure, a blocked inlet filter or a failed inlet valve. See a machine that fills slowly or not at all.
- Door lock and seal: a lock that won't engage or release, or a seal that has split or is holding debris. See washing machine door won't open.
- Leaks: a split door seal, a hose that has worked loose or a leaking pump. See our guide to leaks.
- Bearings and suspension: rumbling, knocking or heavy vibration on spin. See why a machine rumbles or shakes.
- Heating: the element or temperature sensor, when washes come out cold.
- Electronics: control boards and displays, sometimes damaged by power surges.
- Drying: on washer-dryers, the drying heater, fan, condenser or sensors. See washer-dryer faults.
For how these repairs are done, see our page on fixing front loaders.
How the technician finds the fault
The technician starts by confirming the model and serial number, then runs the machine, where it's safe to, to see the fault first-hand. The installation is checked next, because a squashed hose or a drain hose set too low can mimic a failed part. Only then are the likely parts tested, such as the pump, the inlet valve, the door lock, the motor and, on a washer-dryer, the drying circuit. You get a quote once the cause is clear, before any work starts.
Integrated Smeg washer-dryers
A fully integrated Smeg washer-dryer hides behind a cabinet door, which keeps the kitchen tidy but makes the machine harder to reach. The technician takes it out of its space, repairs it and refits it, then checks the cabinet door and the hoses. Drying depends on the condenser and the airflow through the machine, so while it's out, the technician also checks for lint build-up that can stop it drying properly.
Load shedding and your Smeg
Power cuts affect washing machines in two ways. A programme interrupted mid-cycle may leave the door locked with water inside until the power returns. The bigger risk is the surge when the power comes back, which can damage the control board or display. To protect your machine:
- Switch it off at the wall before load shedding starts, or as soon as the power goes.
- Wait a few minutes after the power returns before switching it on again.
- Consider a plug-in surge protector made for appliances, rated for the machine's full load and plugged straight into the wall socket.
If the display stays blank once the power is back and stable, check the plug point with a lamp, then call us. Our article on protecting your washing machine from load shedding goes into more detail.
Parts for Smeg machines
Some Smeg parts are specific to particular models and have to be ordered rather than collected on the day. The technician identifies the exact model and serial number, confirms the part, and tells you before you agree to the repair if it has to be ordered. Common wear parts, such as pumps and inlet valves, are usually simpler to source. See washing machine parts replacement.
Repair or replace your Smeg?
For most faults, repair is the sensible choice, and with an integrated Smeg it has a further advantage: a replacement has to fit the same cabinet space and take the same door, which narrows your choice. Replacing makes more sense when an older machine needs several major parts at once, such as bearings and a control board. The technician sets out the options plainly, and our guide to repair versus replacement explains how to weigh them up.
Care tips for Smeg owners
- Use detergent made for front loaders, measured to the load. Where your model has automatic dosing, use the type of detergent its manual specifies.
- Clean the pump filter as the manual describes, with the machine off at the wall and unplugged.
- Rinse the detergent drawer and wipe the door seal regularly.
- Run an empty hot wash every month or so if you mostly wash cold.
- On a washer-dryer, dry smaller loads than you wash, and keep any lint filter clean.
Areas and booking
We repair Smeg washing machines across Johannesburg, Pretoria, Centurion, Sandton, Midrand and the East Rand, at your home.
To arrange a visit, call or WhatsApp 079 895 0496, or fill in the form on our contact page. Send the model number from the label on the machine, tell us whether it's freestanding or integrated, and describe what it's doing. If the fault started after load shedding, after the machine was moved or after a new installation, mention that too, because it helps the technician narrow things down.
ProServ is an independent repairer. We are not affiliated with, authorised or endorsed by Smeg. Smeg is a trademark of its owner and is used here only to describe the machines we repair. If your machine is still under the manufacturer's warranty, contact Smeg first, because outside repairs may affect that warranty.
Four simple steps
How it works
-
Contact us
Call or WhatsApp with your machine brand and what it is doing. A photo of the error code helps.
-
A technician comes out
We book a time that suits you, and on urgent call-outs we aim to arrive within 1 hour, depending on where the technician is working.
-
Diagnose and quote
We find the fault and give you a clear price before any work. The R300 call-out fee is only payable if you decide not to go ahead with the quote.
-
Repair
Most repairs are done on the spot when the part is available, and every repair carries our 6-month warranty.
Questions and answers
Smeg washing machine repair questions
My integrated Smeg has stopped full of water. Should I pull it out of its cupboard?
Where do I find the model number on my Smeg?
My Smeg is noisy on spin. Is it the bearings?
Is an integrated Smeg harder to repair?
How do I clean the pump filter on my Smeg?
My Smeg washer-dryer smells of burning when it dries. What should I do?
Book a technician
Smeg washing machine playing up?
Call or WhatsApp now and we'll book a technician to come to you. You'll get a quote before any work starts.