Skip to content

Brands we repair

Defy washing machine repairs

Defy washing machine repairs, done at your home: a ProServ technician finds out why your Defy front loader, top loader or twin tub has stopped working properly, and gives you a quote before any work starts.

  • Quote before any work starts
  • R300 call-out, only if you decline the quote
  • 6-month warranty on parts and labour
On this page
  1. Defy machines, old and new
  2. When to call us about your Defy
  3. Defy faults we repair
  4. Safe checks before you book
  5. Defy error codes and flashing lights
  6. What the technician checks
  7. Quote, call-out fee and warranty
  8. Repair or replace your Defy?
  9. Keeping your Defy running well
  10. Areas and booking

Defy machines, old and new

Defy is one of the oldest names in South African appliances. The company traces its roots to 1905 in KwaZulu-Natal, and it was bought in 2011 by Arçelik, the Turkish appliance group behind Beko. That long history means many generations of Defy washing machine are still in use, from older ranges such as the Automaid and Maximaid to today's front loaders, top loaders and twin tubs.

Newer Defy machines use far less water and electricity than the ones they replaced, and SteamCure models add steam at the start and end of the wash. They are also run by an electronic control board and a set of sensors, so a fault is often less obvious from the outside than it was on an older machine with a mechanical timer. Defy machines of every age are part of our washing machine repairs service, and with 20 years of washing machine repair experience behind us we know both the older and the newer designs.

When to call us about your Defy

Book a technician if your Defy does any of these:

  • It won't start. No lights at all, or lights but no response when you press start. Our page on a washing machine that won't turn on lists the checks to do first.
  • It won't fill, spin or drain. The programme stalls at one stage, or the time display stops counting down and the cycle never finishes.
  • It shows a code or flashes its lights. The section on codes below explains what that tells you.
  • It bangs, bumps or grinds. Usually on spin, when worn bearings, tired suspension or something trapped between the drum and the tub make themselves heard. See what a noisy spin can mean.
  • The door or lid won't latch or open. A door lock or lid switch fault, or something caught in the door seal.
  • It leaks. Water from a hose, the pump, an inlet valve or a seal. Our guide to tracing a washing machine leak helps you narrow down where it is coming from.
  • It smells. A musty smell is usually residue (see why your washing machine smells), but a burning or electrical smell means switch off at the wall straight away.

Defy faults we repair

Front loaders

Defy front loaders usually have model numbers starting with DAW. Their faults tend to come back to the same hard-working parts:

  • Drain pump and filter. Coins, hair clips and lint jam the pump, and pumps wear out with age. The machine stops with water in the drum. See why a washing machine won't drain.
  • Door lock. The machine won't start because it can't confirm the door is locked, or the door stays locked after the cycle. Our guide to a washing machine door that won't open explains what is safe to try.
  • Door seal. The rubber seal traps fluff and grows mould in its folds, and a split seal leaks at the front.
  • Motor and carbon brushes. Where the motor uses carbon brushes, worn brushes make the drum turn weakly or stop on spin.
  • Drum bearings. A rumble that grows louder as the spin speeds up. See signs your washing machine bearings are worn.
  • Heating. A failed element or temperature sensor leaves every wash cold, and scale building up on the element doesn't help.
  • Control board. Power surges, often when the electricity comes back after load shedding, can damage the electronics.

Our page on repairing front loaders explains how these jobs are done.

Top loaders

Defy top loaders, with model numbers that usually start with DTL, come in large capacities and take a lot of strain from heavy family loads:

  • Lid switch or lid lock. The machine fills and washes but won't spin, because it can't confirm the lid is shut. See why a machine won't spin.
  • Drive faults. The motor hums or runs but nothing turns in the tub. The link between the motor and the tub has usually worn: a belt, coupling or clutch, depending on the model.
  • Suspension. Worn suspension rods let the tub swing and knock against the cabinet on spin.
  • Inlet valve. No water, a slow fill or a machine that won't stop filling. See why a washing machine won't fill.

Our page on repairing top loaders covers these faults in more detail.

Twin tubs

A twin tub, which Defy sells with model numbers starting DTT, has a wash tub, a separate spin tub and simple controls: a wash timer, a spin timer and a drain selector. Typical repairs are a wash motor or belt that no longer turns the wash plate, a spin motor that hums without turning, worn timers, and a spin lid switch or brake that has stopped working. If the spin tub keeps turning after you lift the lid, stop using it and call us: that safety stop is there to protect your hands.

Safe checks before you book

Some stoppages have simple causes. Keep to these checks, and leave anything electrical or anything inside the machine to a technician:

  • Power: the plug is in and switched on at the wall, and the house has power. A lamp plugged into the same socket shows whether the plug point is working.
  • Water: the tap is fully open and the inlet hose isn't kinked or squashed behind the machine.
  • Drain hose: it isn't kinked, and it isn't pushed deep into the standpipe. The manual for Defy's DTL148 top loader, for example, asks for a drain hose height of 65 to 100 cm, with no more than 15 cm of hose inside the drain.
  • Load: the drum isn't packed tight, and you're not spinning one heavy item, like a bath mat, on its own.
  • Level: the machine stands firmly on all four feet and doesn't rock.

On a front loader you can also clean the pump filter behind the small flap at the bottom front. The manual for Defy's DAW381 front loader, for example, suggests doing it every three months, or whenever it blocks.

Safety first: switch off at the wall and unplug the machine before you open the filter flap. Defy warns that the water inside can reach 90°C on a hot wash, so let it cool first, put towels down and drain it through the small emergency hose into a shallow container before you unscrew the filter.

Defy error codes and flashing lights

Defy has sold many ranges over the years, and their fault signals differ: some show a code, others flash a pattern of lights, and some simply stop. A code points to the system with the problem, such as the water supply, the drain or the door lock, rather than to the exact part.

Our Defy washing machine error codes guide lists the codes Defy machines commonly show and what to check first for each one. If yours isn't listed, photograph the display (or take a short video of the flashing lights) and send it to us on WhatsApp with the model number.

What the technician checks

The technician starts with the simple things: whether the machine stands level, the drain hose sits at the right height, the tap is open and the right programme was chosen. Then come the parts the symptoms point to. On a front loader that can mean the pump, the door lock and the heating circuit, plus a feel for play in the drum that gives away worn bearings; on a top loader, the lid switch, the drive and the suspension.

Testing first matters because several faults look alike. A machine that won't spin might have worn motor brushes, a failed lid switch, undrained water or simply a lopsided load, and each needs a different fix. You get the quote once the cause is clear.

Quote, call-out fee and warranty

You get a quote before any work starts, and you decide whether to go ahead. The call-out fee is R300, only payable if you decide not to go ahead with the quote. Every repair carries our 6-month warranty on parts and labour.

Repair or replace your Defy?

Most Defy faults are worth repairing. Pumps, door locks, lid switches, inlet valves, carbon brushes and heating elements cost a fraction of a new machine. The decision gets harder when:

  • a front loader needs bearings and the tub is a sealed unit, so the whole tub has to be replaced;
  • the outer tub is cracked, or the cabinet of a top loader has rusted through;
  • the control board has failed on a machine that is already old, and the board alone costs a large part of a new machine; or
  • parts for a very old model are no longer made.

The technician will tell you plainly if a repair doesn't make sense. Our guide to repairing or replacing a washing machine walks through the decision, and the washing machine repair cost page explains what drives the cost of a job.

Keeping your Defy running well

  • Use the right powder. Use washing powder or liquid made for automatic machines, not hand-wash powder, which makes far too much foam. Measure it: more detergent doesn't mean cleaner clothes.
  • Run the drum clean programme. The DAW381 manual suggests running the empty Drum Clean programme every one to two months. On a top loader, run an empty hot wash now and then.
  • Let it dry out. Leave the door and the detergent drawer slightly open after a wash, unless small children or pets can get into the laundry, and wipe the folds of the door seal every couple of weeks.
  • Rinse the drawer. Defy suggests cleaning the detergent drawer every four to five washes, before old powder hardens in it.
  • Empty pockets. Check them before every wash, and put underwired bras in a wash bag.
  • Protect it from surges. Switch the machine off at the wall during load shedding and wait for the power to settle before you start it again. See how to protect your washing machine from load shedding.

If you'd like an older Defy looked over before something fails, see washing machine servicing.

Areas and booking

We repair Defy washing machines across Johannesburg, Pretoria, Centurion, Sandton, Midrand and the East Rand, in houses, flats and townhouses alike. If you're just outside those areas, call and ask.

Call or WhatsApp 079 895 0496 to book, or send a Defy repair request online. Tell us the model number, what the machine is doing and any code or lights on the display; a short video of the fault helps the technician come prepared.

ProServ is an independent repairer. We are not affiliated with, authorised or endorsed by Defy. Defy is a trademark of its owner and is used here only to describe the machines we repair. If your machine is still under the manufacturer's warranty, contact Defy first, because outside repairs may affect that warranty.

Four simple steps

How it works

  1. Contact us

    Call or WhatsApp with your machine brand and what it is doing. A photo of the error code helps.

  2. A technician comes out

    We book a time that suits you, and on urgent call-outs we aim to arrive within 1 hour, depending on where the technician is working.

  3. Diagnose and quote

    We find the fault and give you a clear price before any work. The R300 call-out fee is only payable if you decide not to go ahead with the quote.

  4. Repair

    Most repairs are done on the spot when the part is available, and every repair carries our 6-month warranty.

Questions and answers

Defy washing machine repair questions

Do you repair older Defy models like the Automaid and Maximaid?
Yes, as long as the parts are still available. Older Defy machines are often simple to work on, and a new pump, door lock or set of brushes can keep one going for years. The technician checks that the parts can be found before quoting.
Can you fix a Defy twin tub?
Yes. We repair Defy twin tubs at your home, including the wash and spin motors, belts, timers, the drain selector and the spin lid switch. A twin tub has few parts, so a fault is usually quick to trace to one of them.
My new Defy front loader shakes violently on its first spin. What is wrong?
On a new machine, the first thing to rule out is the transit bolts at the back. Defy warns that the machine will be damaged if they are not removed before it is used. Stop the machine, switch off at the wall and check with whoever installed it, or ask us to check the installation.
Where do I find the model number on my Defy?
On front loaders it is on the label inside the door. On top loaders and twin tubs, look for the label on the cabinet; the user manual shows where. Write the whole number down, or photograph the label, and send it when you book.
My Defy trips the earth leakage. Can I keep using it?
No. An earth leakage or breaker that trips when the machine runs can point to a dangerous fault, for example in the heating element, the wiring or a part that water has reached. Leave the machine switched off at the wall and book a technician to test it.
Are parts for Defy washing machines easy to get?
For many current and recent models, wear parts such as pumps, door locks and valves are widely available locally. Parts for very old models can be harder to find, and some are no longer made. The technician confirms the part before you agree to the repair.

Book a technician

Defy washing machine playing up?

Call or WhatsApp now and we'll book a technician to come to you. You'll get a quote before any work starts.

info@proservwashingmachinerepairs.co.za