What we do
Washing machine repair services
ProServ's washing machine repair services cover the whole life of a machine: fixing front loaders, top loaders and washer-dryers, installing and plumbing in new machines, servicing machines that work hard, and replacing worn parts. Everything happens at your home. A technician comes to you, finds the fault and gives you a quote before any work starts. We repair all major washing machine brands, and if a repair doesn't make financial sense, we'll tell you.
- Quote before any work starts
- R300 call-out, only if you decline the quote
- 6-month warranty on parts and labour
What we repair
Choose a service
- Front loader repairs Bearings, pumps, door locks, seals, brushes and control boards on front loading machines.
- Top loader repairs Lid switches, belts, clutches, gearboxes, pumps and suspension on top loading machines.
- Washer-dryer repairs Drying heaters, fans, condensers and sensors, plus the washing faults, on combo machines.
- Installation and plumbing-in New or moved machines connected, levelled, transit bolts removed and tested.
- Servicing and maintenance A full check of filters, hoses, seals, bearings and brushes to catch problems early.
- Parts replacement Pumps, motors, bearings, door seals, boards, heating elements and more, fitted at your home.
On this page
How to choose a service
You don't need to know what's wrong before you book. Most people start from what the machine is doing, and that's all the technician needs to begin. This table matches common situations to the right service, and each service page goes into the detail.
| Service | Book it when |
|---|---|
| Front loader repairs | Your front loader stops mid-cycle, won't drain or spin, leaks at the door or has started to rumble on spin. |
| Top loader repairs | Your top loader fills but won't agitate or spin, bangs the cabinet on spin, or won't drain. |
| Washer dryer repairs | Your washer-dryer washes but won't dry, dries badly, or has any of the usual washing faults. |
| Installation and plumbing-in | A new machine needs connecting, or your machine is moving to a new spot or a new home. |
| Servicing and maintenance | The machine still works, but it does a lot of washing or you'd like it checked before small problems grow. |
| Parts replacement | You already know which part has failed, such as a torn door seal or a broken door catch. |
| Not sure? | Describe the symptoms when you book, or start with our guide to common washing machine problems. |
What each service covers
Each service is carried out at your home. Here's what's involved in each one, with a link to the page that covers it in full.
Front loader repairs
Front loaders pack a heavy drum, two drum bearings, a rubber door seal, an electronic door lock, a drain pump, a motor and a control board into a compact cabinet. Repairs cover all of them: clearing or replacing pumps, fitting new door locks and seals, replacing carbon brushes or testing inverter motors, renewing heating elements and temperature sensors, and replacing the bearings and shaft seal. Bearing jobs take longest, because the drum and outer tub have to come out. Our page on front loader repairs explains each fault.
Top loader repairs
Top loaders load from above and move the washing with either a tall central agitator or a low pulsator in the base of the drum. Different parts wear on them: lid switches and lid locks, drive belts, couplings and clutches, gearboxes on agitator machines, suspension rods, drain pumps and inlet valves. A top loader that fills but doesn't wash, or thumps the cabinet on spin, often points to one of these. See top loader repairs.
Washer-dryer repairs
A washer-dryer is a front loader with a drying system added: a separate heating element, a fan, a condenser or air duct, and the thermostats or sensors that decide when the load is dry. The technician can look at both halves on the same visit. Clothes that come out hot but damp usually mean the moist air isn't being cleared, while cold, damp clothes point to the heating side. More on washer dryer repairs.
Installation and plumbing-in
A new machine needs more than a plug point. A front loader's transit bolts, which lock the drum for delivery, have to come out. The inlet hose goes onto the tap, the drain hose has to sit at the right height in a standpipe or sink trap, and the machine has to stand level so it doesn't walk on spin.
Installation covers connecting, levelling and a test run, for new machines and for machines moving to a new spot. If the space has no tap or drain point yet, mention it when you book. See washing machine installation.
Servicing and maintenance
A service is a check-up for a machine that still works. The technician cleans the filters, checks the hoses, door seal, drum bearings, suspension and levelling, and runs a test cycle, so worn parts are found before they fail. It's most worthwhile for machines that run a load or more a day, for rental properties between tenants, and for machines that are a few years old. Details are on washing machine servicing.
Parts replacement
When a part has failed, the repair is only as good as the replacement and the way it's fitted. This covers drain pumps, motors and carbon brushes, drum bearings and seals, door seals and door locks, inlet valves, pressure switches, heating elements, shock absorbers and control boards, fitted at your home and covered by our 6-month warranty. When a part has to be ordered in, you'll hear about it before you agree to the repair. See washing machine parts replacement.
What every visit includes
Whichever service you book, the visit follows the same pattern, and you stay in control of the cost.
- A proper diagnosis. The technician starts with what you've noticed, rules out simple causes such as the water supply, the filters and the hoses, then tests the parts involved. Many modern machines also have a service test mode that helps pinpoint the fault.
- A quote before any work. You hear what's wrong, what needs replacing and what it will cost before the repair starts.
- Your decision. The call-out fee is R300, only payable if you decide not to go ahead with the quote.
- The repair. If the part is available, most repairs are finished on the same visit. If it has to be ordered, you'll know before you agree to the repair.
- A check before the technician leaves. The machine is run so you can see it working, and the repair carries our 6-month warranty on parts and labour.
Repair, service or replace?
A service suits a machine that works; a repair suits one that has developed a fault. If you're hearing a new noise, finding water on the floor or seeing an error code, book a repair rather than a service, because the technician needs to find the cause.
Replacing the machine only makes sense when the repair costs too much compared with a new machine of similar quality, or when the drum, outer tub or cabinet is too far gone. Age on its own doesn't decide it: a well-built machine with a sound drum and tub can be worth repairing for years. Our guide on whether to repair or replace your washing machine covers the decision, and the technician will give you an honest view on the day.
What affects the price
Every job is quoted after the diagnosis, because the same symptom can be a quick fix or a major repair. A drain fault might be a coin in the pump filter or a pump that has burnt out. What moves the price is the part itself (a control board usually costs much more than a set of carbon brushes), the time the job takes (bearing replacements take longest), whether the machine is built into a cabinet, and whether a part has to be ordered. See washing machine repair cost for more on what drives the price.
Brands and machine types
We repair all major washing machine brands, from everyday family machines to premium European models, freestanding and integrated. Our guide to the brands we repair links to a page for each make, and if your machine is showing a code, our washing machine error code guides explain what it usually means.
Four simple steps
How it works
-
Contact us
Call or WhatsApp with your machine brand and what it is doing. A photo of the error code helps.
-
A technician comes out
We book a time that suits you, and on urgent call-outs we aim to arrive within 1 hour, depending on where the technician is working.
-
Diagnose and quote
We find the fault and give you a clear price before any work. The R300 call-out fee is only payable if you decide not to go ahead with the quote.
-
Repair
Most repairs are done on the spot when the part is available, and every repair carries our 6-month warranty.
Questions and answers
Frequently asked questions
Which service should I book if I don't know what's wrong?
Is every service done at my home?
I already know which part has failed. Can I book just that?
What happens if the part isn't available on the day?
Can you move my machine to a new spot in the house?
Is servicing worth it if my machine is working fine?
Book a technician
Washing machine broken? Let's get it fixed.
Call or WhatsApp now and we'll book a technician to come to you. You'll get a quote before any work starts.