Skip to content

Error code guides

Samsung washing machine error codes

Samsung washing machine error codes, which Samsung calls information codes, pair a number or letter with C or E, such as 4C (no water coming in) and 5C (not draining). Here is what each code means according to Samsung's own support guides, with the checks you can safely do first.

  • Quote before any work starts
  • R300 call-out, only if you decline the quote
  • 6-month warranty on parts and labour
On this page
  1. How Samsung information codes work
  2. Find your Samsung model number
  3. Safe checks before you call
  4. Common Samsung washing machine error codes
  5. When a technician is needed
  6. What happens on a repair visit
  7. When to stop and call a technician
  8. If your code isn't listed
  9. Book a Samsung repair

How Samsung information codes work

A Samsung machine shows a code when one of its self-checks fails, then stops or pauses the programme. Samsung usually lists the C and E forms of a code together with one meaning (8C and 8E can differ, as the table shows), so 4C and 4E both mean a water supply problem, and your machine shows one form or the other. An extra digit narrows things down: 4C2 means the incoming water is too hot, and dC1 points to the door lock rather than an open door.

Samsung warns that some characters look alike on the display, such as 5 and S or 3 and E, so read the code twice if it seems to be missing from the table.

Find your Samsung model number

Samsung says codes can differ between models, so have the model number ready. It usually starts with WW on a front loader, WA on a top loader and WD on a washer dryer. The rating label is usually at the back of the machine; many front loaders also have one inside the door opening, and on a top loader you can check under the lid.

Safe checks before you call

Safety first: switch off at the wall and unplug before you touch a filter or hose. Samsung warns you to take extra care with the hot water connection, and water left after a hot wash can scald, so let it cool first.

Not filling: 4C and 4C2

Check that the tap is fully open, the hose isn't kinked and the pressure is normal at another tap. For 4C2, switch off at the wall and close both taps, then move the cold inlet hose off the hot tap, which in most homes is the one fed by the geyser, and onto the cold tap before you open it again. With the taps closed, rinse the mesh filter in the hose, and clean the detergent drawer, which Samsung links to some 4C codes.

Not draining: 5C

On a front loader, the debris filter is behind a small cover at the bottom front. Put down towels and a container, pull out the emergency drain hose, take off its cap and let the water run out. Then turn the filter anticlockwise, clean it with a soft brush and refit it clockwise until it's secure. Finally, put the cap back on the emergency drain hose and secure it.

Balance and power: Ub and UC

For Ub, spread the laundry evenly around the drum and check the machine stands level on a flat, stable floor. For UC or the 9C codes, plug the machine straight into a wall socket, not an extension lead, and wait for steady power.

Common Samsung washing machine error codes

Samsung washing machine error codes, meanings, likely causes and safe checks
Code What it usually meansLikely causesWhat you can safely check
4C / 4E Water supply problem: the machine isn't filling Tap closed, kinked hose, low pressure, a clogged mesh filter or blocked detergent drawer; also the inlet valve, level sensor or main board Open the tap, straighten the hose, and clean the mesh filter (taps closed) and the detergent drawer
4C2 / 4E2 The water coming in is too hot The cold inlet hose is on a hot tap Switch off at the wall and unplug, close the taps, move the hose to the cold tap, then open the cold tap and restart
5C / 5E Drain problem: the water isn't draining Clogged debris filter, kinked or blocked drain hose, a blocked household drain or a faulty drain pump Straighten the drain hose and clean the debris filter (switch off and unplug first, expect water)
dC / dE Door open: the door isn't properly closed Door not pushed shut, or laundry caught in it Close the door firmly with nothing caught in it
dC1 / dE1 The door lock isn't locking or unlocking properly A door lock fault Switch off at the wall, wait a minute and restart; if it returns, call a technician
ddC Add Door opened without pressing Start/Pause (models with an Add Door) The small Add Door was opened mid-cycle or isn't shut Close the Add Door, then press and hold Start/Pause
OC / OE / OF Overflow: too much water in the drum Too much detergent, or water still coming in, such as an inlet valve that won't close or a water level fault Switch off at the wall (at the DB board if the plug or socket is wet), close the tap and call a technician; use less detergent next time
Ub / UE Unbalanced load: the spin can't start Laundry bunched on one side, one bulky item, or the machine not level Spread the laundry evenly and check the machine is level and stable
LC / LE Low water level or a drain hose problem (also LC1 or LE1) Drain hose end too low so water siphons out, a blocked drain hose, or a leak Raise the hose end to the height in your manual and look for water under the machine
1C / 1E Water level sensor isn't working properly The level sensor, its air hose or its connection Restart once; if it returns, call a technician
3C / 3E Drum motor isn't running as expected A fault in the motor or the parts that drive it Switch off for a minute and start a new programme; if it returns, call a technician
HC / HE Water temperature or heating problem A hose on a hot supply, or a heating fault Check the hose is on the cold tap and restart; if it returns, call a technician
tE / tC1 / tC2 / tC3 Temperature sensor error (also tE1, tE2 or tE3) A faulty temperature sensor or connection Switch off at the wall for a minute and start a new programme; if it returns, call a technician
8C / 8E Vibration (MEMS) sensor fault; on some models 8E is a current error instead A fault in the sensor that detects out-of-balance movement Restart once; if it returns, call a technician
AC / AE Control boards aren't communicating (AC6 or AE6: the main and inverter boards) A board or wiring fault Switch off and restart; if the code stays, call a technician
UC / 9C1 / 9C2 Supply voltage too low or unstable (also 9E1 or 9E2) Power cuts, an irregular supply, or an extension lead or adaptor Plug straight into a wall socket and wait for steady power
PC / PE Clutch position can't be detected (top loaders; also PC1 or PE1) A clutch or clutch sensor fault Switch off at the wall and call a technician
bE1 / bE2 / bE3 A button is stuck or not responding A sticking control panel button Switch off, unplug and wipe the buttons with a lightly dampened cloth
Sud Too much foam: the machine removes it, then carries on (not a fault) Too much detergent, or a build-up of powder detergent Use less detergent; if it keeps happening, run Eco Drum Clean or an empty 90°C cotton cycle

When a technician is needed

For the sensor, motor, heating and board codes (1C, 3C, 8C, AC, HC, tE and tC), Samsung's advice is to switch the machine off and restart the programme. If the code comes back, the part behind it needs testing. The top loader clutch codes PC and PE need a technician too, and so does an overflow code (OC, OE or OF), even if it clears after the machine drains.

If the machine overfills or you find water underneath, switch off at the wall, or at the DB board if the plug or socket is wet, then close the tap. If the earth leakage trips when the machine starts, leave it off until it has been checked.

What happens on a repair visit

The technician reads the code, asks what the machine was doing when it stopped and tests the parts behind it: for 4C and 1C, the inlet valve, the water level sensor and the small air hose that feeds it; for 5C, the drain pump; for dC1, the door lock; for HC or tE, the heater and temperature sensor. On inverter models, 3C and AC6 mean testing the motor, its wiring and the inverter board.

You get a quote before any work starts, and most repairs are done there and then when the part is available. The call-out fee is R300, only payable if you decide not to go ahead with the quote, and every repair comes with a 6-month warranty on parts and labour. See Samsung washing machine repairs for the wider picture, or our pages on repairing front loaders and top loaders.

When to stop and call a technician

Stop using the machine and call us if a code keeps coming back after the simple checks, if there's water on the floor, a burning smell, or the machine trips the electricity. Codes that point to heating, sensors, the motor or the control board involve electrical parts, so please leave those to a technician.

WhatsApp us a photo of the display and the model number and we'll tell you what the code usually means on that model. For the full picture, see Samsung washing machine repairs, or read our general guide to a washing machine showing an error code.

If your code isn't listed

Washer dryers and machines with extra features have codes of their own, so check your model's manual or send us the code with the model number. Our guides to a washing machine not filling with water and a washing machine door that won't open cover the symptoms behind several codes. We're an independent repairer, not part of Samsung; the meanings here come from Samsung's own support pages.

Book a Samsung repair

Call or WhatsApp with the code and your model number, or use our contact form. We've been repairing washing machines for 20 years, and our home page sets out what happens when a technician visits.

Questions and answers

Samsung error code questions

Are 4C and 4E the same code on a Samsung?
Yes. Samsung lists them together with one meaning: water isn't being supplied. Which one you see depends on the model, and the checks are the same for both: the tap, the hose, the pressure and the mesh filter.
Why will my Samsung not respond after showing 4C?
Samsung says the machine drains for about three minutes after a 4C code, and the buttons stay disabled while it does. Wait for it to finish, sort out the water supply, then start the programme again.
What does 4C2 mean on a Samsung washing machine?
It means the water coming in is too hot, usually because the cold inlet hose has been connected to a hot tap. Switch off at the wall and unplug, close both taps and move the hose to the cold tap, then open the cold tap and restart. Samsung warns that hot water may deform some laundry on certain cycles.
Why does my Samsung show LC when nothing is leaking?
LC can come from the drain hose rather than a leak. If the end of the hose sits too low, for example on the floor, water can siphon out while the machine fills. Raise the hose end into the standpipe or sink as the manual shows, and check it isn't blocked.
What does UC mean on my Samsung?
UC means the supply voltage is low or unstable, which can happen around load shedding or when the machine runs off an extension lead. Plug it straight into a wall socket and wait for steady power. If it keeps showing when the rest of the house has a good supply, have the machine checked.
Is Sud a fault on a Samsung washing machine?
No. Sud means the machine has detected too much foam and is removing it, after which it carries on with the wash. Use less detergent next time, and choose one made for automatic machines rather than hand washing.
Does dC mean my Samsung door lock is broken?
Usually not. dC means the machine is trying to run with the door open, so close it firmly and check that no laundry is caught. If you see dC1 instead, the lock itself isn't locking or unlocking properly, and it needs a technician if it returns after a restart.

Book a technician

Samsung error code won't clear?

Call or WhatsApp now and we'll book a technician to come to you. You'll get a quote before any work starts.

info@proservwashingmachinerepairs.co.za